Estimated Weight: 31 oz. (878.9 g)
Recovery: 18 in. "Skull and Bones" Parachute
Recovery Upgrade: Midpower
Glue: Gorilla Wood Glue, epoxy
Launch equipment: Klima Air Launcher with 6mm rod, Estes Pro Series Pad, 1/4 inch rod
Projected Altitude: 500 ft. (610 m)
Recommended *Pro29* E and F or Klima 5 way mount
The Pro Series II Der Big Red Max is gigantic! But thanks to it's weight and frontal area, you don't have to worry about long search and recover missions (or hitting any of the CIA's low earth orbiting hardware)
Laser cut "thru the wall" Plywood Fins with Balsa Laminating Sheets feature as does a Screw on Motor Retainer. Get yourself a couple of rattle tins of spray on black and red paint and stick on the four sheets of water slide Decals and blast off!
You can "kit bash" this into a cluster rocket for a tower of smoke and flame using a Klima 75mm motor mount that takes 5 x 18mm motor. C or D motors, your choice.
Plenty of room in the nose for a Micro DV cam, too!
WHAT YOU NEED TO BUILD:
Scissors, pencil, ruler, fine sandpaper, wax paper, epoxy, yellow glue, sanding block, hobby knife, masking tape, primer (white), paint (red, black) and clear coat (optional). Tools, construction and finishing supplies not included.
WHAT YOU NEED TO LAUNCH (sold separately):
Klima Air Launcher with 6mm rod, Porta-Pad E Launch Pad and Pro Series II Launch Controller, model rocket engines, starters and recovery wadding. Six C 1.5V high quality AA alkaline batteries are also required for Pro Series II launch controller (not included).